Electromagnetic Field Testing System

The contract involves the delivery of an RF system suitable for conducting tests according to international standards and documents: ISO 11452-2, ISO 11452-4, UN Reg.10 Rev.06 20MHz-2GHz (draft rev.7 - 6GHz) and vehicle manufacturer standards: PSA Group B21 7110D, VW TL81000, BMW GS 95002-2, FCA CS-00054, Ford FMC 1278, MBN 50284-2. The equipment should allow testing of objects with dimensions up to 2.5m x 1.5m x 1.2m. The tested objects can be powered and connected to communication, data acquisition, and cooling media conditioning systems. Tests will be conducted in an ALSE chamber, which is part of another task. Minimum technical requirements are specified in § 2. DESCRIPTION OF THE SUBJECT OF THE ORDER SWZ. Additional requirements include: 1. Installation and acceptance of the subject of the order within 4 weeks after signing the contract, the contractor must present a written schedule of work related to delivery, integration, commissioning, acceptance, and training. 2. Within 4 weeks of signing the contract, the contractor should specify all installation requirements necessary for the operation of the devices. 3. At least 2 weeks before installation, the contractor will inform the buyer of their readiness to carry out the delivery. 4. The available media parameters at the BOSMAL Institute are as follows: a. Power supply: 400 V ±5%, 230 V ±5%. b. Compressed air: 8 bar. c. Cooling circulating water: supply pressure 3 … 5 bar; temperature: 5 … 30 °C. 5. The cost of insuring the equipment during delivery and commissioning, including packaging, loading, transport insurance, transport, unloading, technical documentation, installation and commissioning costs, and training of operating personnel, is borne by the contractor. 6. The contractor will be required to conduct basic training combined with testing specific objects within the contract execution period. The training and costs of this part of the order should be included in the offer price: a. Training location: buyer's premises, b. Training duration – at least 2 days covering the following scope: i. essential operational aspects, parameters to monitor during system operation, ii. system maintenance, iii. activities preceding system use, conducting tests. After the training, the contractor is obliged to issue certificates of completion and provide training materials in written or electronic form. Training materials may partially be in a language other than Polish, but essential information regarding operation and safety must be in Polish. Any references in the specification of the terms of the order indicating the type, trademarks, or origin of the subject of the order should be read along with the words “or equivalent.” If the description of the subject of the order refers to standards, technical evaluations, technical specifications, and reference technical systems, the buyer allows equivalent solutions. If equivalent solutions are offered, the buyer will not reject the offer solely because the proposed delivery does not comply with the standards, technical evaluations, technical specifications, and reference technical systems referred to in the description of the subject of the order, provided that the contractor proves in the offer, particularly through the evidence referred to in Articles 104-107 of the Act, that the proposed solutions meet the requirements specified in the description of the subject of the order to an equivalent degree. If the description of the subject of the order refers to performance or functionality requirements, the buyer will not reject an offer compliant with the Polish Standard transposing the European standard, standards of other member states of the European Economic Area transposing European standards, with European technical assessment, with common technical specification, with international standard or with reference technical system established by the European standardization body, if these standards, technical assessments, specifications, and reference technical systems relate to performance or functionality requirements specified by the buyer, provided that the contractor proves in the offer, particularly through the evidence referred to in Articles 104-107, that the delivery meets the performance or functionality requirements specified by the buyer. A detailed description of the order is included in § 2. DESCRIPTION OF THE SUBJECT OF THE ORDER SWZ and in the order documents.